The CXL2, DXL2 and MXL2 perform an Automatic Daily Self Test (ADST). The ADST checks the functionality of the locator including the receiving aerials each day when it is first switched on. The result of this test is then recorded and stored on memory within the locator and can be downloaded onto a laptop at any time.
The Automatic Daily Self Test result gives confirmation to the operator that the locator is working to its optimum before use at the start of each day of use.
If attention is required the ADST will alert the operator, and the locator should be sent to an authorised C.Scope Service Centre. This protects the operator from unknowingly using a faulty safety product.
C.Scope has a network of authorised Service Centres that can service, test and check the locators. These authorised Service Centres are also able to issue third-party Function Check and Calibration Certification should you require it for HSE Permit to Dig requirements or similar.
C.Scope’s ADST ensures that all the XL2 products are fully functional BEFORE USE each and every day that a product is in use. Because it is a ‘daily’ check, this is an advantage over products that are only ’tested’ annually at the time of a service. It is also an advantage over products that rely on daily manual function checks because there is no guarantee that such checks are carried out thoroughly or indeed carried out at all in some cases.
The XL2 range also comes with a three year warranty. The new C.Scope products embrace all the advantages that digital technology can offer; increasing performance, reducing the risk of human error and at the same time reducing the cost of ownership.
For more information on ADST and how it can benefit you and your business, please call 01233 629181 or email firstname.lastname@example.org